Safety Products - Respiratory Protection - Supplied Air Systems & Parts
Bullard EDP10 Bullard Free-Air Pump 1-2 Man Electric Driven Oil-Less
Bullard Free-Air pumps transfer ambient air from a breathable air source to a supplied-air respirator. The ambient air is filtered through an inlet filter and a Carbofine outlet filter before entering the respirator's air supply hose. No carbon monoxide, oil vapor or oil mist is produced; therefore, carbon monoxide monitors, high temperature alarms or airline filters are not required. No calibration necessary. Supplied-air respirators used with these pumps must be NIOSH approved to operate at 15 psi or less.
One-Two Worker Pump
Supplies air to 2 continuous-flow supplied-air half- or full-face mask respirators, or 1 continuous-flow supplied-air hood or helmet respirator. Open drip-proof motor drive for use in clean, dry areas. Airflow 10 cfm at 5 psig.
Features:
Pumps are completely mobile and protable; no expensive installation costs.
Supplies air for one continuous flow airline hood/helmet style respirator or two tight-fitting facepiece style respirators approved to operate at 15 psig or less.
Air flow: 10 cfm at 10 psig.
Benefits:
Low-cost means of supplying clean, breathable air to workers in contaminated environments up to 300 feet away from the pump.
Easy to operate and maintain.
Electric and air-driven models available to suit any application.
Safety Products - Industrial Supply |TnA Safety